Dinli DL 904
Brake fluid capacity & service interval
Dinli DL 904 requires brake fluid with a capacity range between min and max. Service intervals include checks at 1000 km or 3 months and 1 hour. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| DL 904 - 450 Lightning (2008- ) |
|
| DL 904 - 450 Lightning (2008- ) |
|
Additional Notes
- The Dinli DL 904 - 450 Lightning, starting from 2008, uses a hydraulic brake system, meaning brake fluid is contained within a closed hydraulic circuit where level is measured against fixed minimum and maximum markers on the reservoir rather than by a precise volume figure.
- Under normal use conditions, the brake fluid level on the 450 Lightning is checked at intervals of every 1,000 km or every 3 months, whichever comes first.
- An initial service check interval of 1 hour of operation is specified for the hydraulic brake system, which is a significantly shorter interval than the normal use schedule and applies only during the early break-in period.
- Both the normal and initial service specifications call for the fluid level to sit between the minimum and maximum marks, meaning neither interval involves a full fluid replacement volume figure but rather a level verification against the reservoir's marked range.