Derbi Rambla
Brake fluid capacity & service interval
Derbi Rambla uses brake fluid with a capacity range between min and max. Service intervals require a change every 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Rambla 250i (2010-2014) |
|
| Rambla 300i (2010-2013) |
|
| Rambla 125 (2008-2014) |
|
| Rambla 250 i.e. (2008-2009) |
|
Additional Notes
- All four Derbi Rambla configurations share a brake fluid fill level expressed as a range between a minimum and maximum mark rather than a fixed volume. This approach is standard for hydraulic brake reservoirs, where the correct level is maintained within a defined window on the reservoir body.
- The 24-month change interval applies uniformly across the Rambla 125, 250 i.e., 250i, and 300i under normal use conditions. A time-based interval of this kind reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere and degrades over time regardless of mileage.
- The Rambla 125 carries the widest model year span of the four configurations, covering 2008-2014, yet shares the same 24-month interval and min-to-max fill specification as the larger-displacement variants.
- The 250 i.e. variant covers only 2008-2009, while the 250i covers 2010-2014. Both displace 250cc but represent a generational change in the lineup, and both carry identical brake fluid service specifications despite the designation difference.
- The Rambla 300i, spanning 2010-2013, is the largest-displacement configuration in the group. Even with the increased engine size, the brake fluid specification remains consistent with the smaller variants, indicating a shared hydraulic brake system architecture across the range.