CFMoto CF 500 4x4

Brake fluid capacity & service interval

CFMoto CF 500 4x4 uses brake fluid with a capacity range defined between min and max. Service intervals include 3200 km/24 months/200 hours, 2000 km/24 months/200 hours, and 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
CF 500 AU-6L 4x4, X550 (2014- )
  • Use: Normal
  • Between min and max.
CF 500(-6) 4x4 Terracross (2013- )
  • Use: Normal
  • Between min and max.
  • Change 3200 km/ 24 months/ 200 hours
CF 500-2(A) (2013- )
  • Use: Normal
  • Between min and max.
  • Change 24 months
CF 500-3 Rancher (2013- )
  • Use: Normal
  • Between min and max.
  • Change 24 months
CF 500(-A) 4x4 (2008-2012)
  • Use: Normal
  • Between min and max.
  • Change 2000 km/ 24 months/ 200 hours

Additional Notes

  • Brake fluid level across all listed CFMoto CF 500 4x4 configurations is specified as a reservoir fill maintained between the minimum and maximum marks, rather than a fixed volume. This type of specification reflects a top-up or inspection standard rather than a measured service fill quantity.
  • The CF 500(-A) 4x4 covering 2008-2012 carries a brake fluid change interval of 2000 km, 24 months, or 200 hours, whichever comes first under normal use conditions.
  • The CF 500(-6) 4x4 Terracross starting from 2013 has a longer distance-based change interval of 3200 km compared to the 2000 km interval on the earlier CF 500(-A) 4x4, while both share the same 24-month and 200-hour thresholds under normal conditions.
  • The CF 500-2(A) and CF 500-3 Rancher, both with a starting year of 2013, specify brake fluid changes on a time-only basis of 24 months, with no distance or operating hour thresholds listed alongside.
  • The CF 500 AU-6L 4x4 and X550 starting from 2014 carry only the min-to-max level specification, with no change interval listed for the hydraulic brake system.
  • All five configurations share the same hydraulic brake system note, indicating a conventional hydraulic circuit rather than a mechanical or cable-actuated arrangement across the CF 500 4x4 range covered by these specifications.

Other Systems