Cectek Kingcobra

Brake fluid capacity & service interval

Cectek Kingcobra uses brake fluid with a capacity range between min and max. Service intervals occur every 16000 km or 24 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Kingcobra 500 EFI (2009- )
  • Use: Normal
  • Between min and max.
  • Change 16000 km/ 24 months

Additional Notes

  • The Cectek Kingcobra 500 EFI runs a hydraulic brake system, meaning brake fluid is pressurized mechanically to actuate the brakes rather than relying on a cable or rod linkage.
  • The brake fluid level is maintained between a minimum and maximum mark rather than a fixed volume fill, which is the standard approach for hydraulic brake reservoirs where fluid level reflects pad wear over time.
  • Under normal use conditions, the specified change interval is 16,000 km or 24 months, whichever comes first, reflecting the dual criteria common in brake fluid servicing where both mileage and time-based degradation are considered.

Other Systems