Brixton Felsberg
Brake fluid capacity & service interval
Brixton Felsberg uses brake fluid with a capacity range between min and max. Service intervals require a change every 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Felsberg 125 |
|
| Felsberg 125 XC |
|
| Felsberg 250 |
|
Additional Notes
- All three Felsberg variants listed — the 125, 125 XC, and 250 — share an identical brake fluid service interval of 24 months under normal use conditions.
- The Brixton Felsberg 125's hydraulic brake system calls for a fluid level maintained between the minimum and maximum reservoir marks, which is a standard fill reference rather than a measured volume capacity.
- A 24-month change interval for brake fluid reflects the hygroscopic nature of most brake fluids, meaning the fluid absorbs moisture over time and requires periodic replacement regardless of mileage or riding frequency.
- The Felsberg 125 XC carries the same 24-month brake fluid change interval as the standard 125, despite being a separate variant, indicating no differentiation in brake fluid service requirements between the two 125-displacement models.
- The Felsberg 250 follows the same between-min-and-max fill specification as the smaller-displacement models, with no distinct volumetric capacity figure listed for any of the three variants.