Beta REV

Clutch fluid capacity & service interval

Beta REV clutch fluid capacity ranges between min and max. Service intervals include checking at 1000 km/ 40 hours or 10 hours, and changing at 3000 km/ 120 hours or 100 hours/ 12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
REV 3 (125cc) (2007-2008)
  • Use: Normal
  • Between min and max.
  • Check 1000 km/ 40 hours
  • Change 3000 km/ 120 hours
REV 3 (200cc) (2007-2008)
  • Use: Normal
  • Between min and max.
  • Check 1000 km/ 40 hours
  • Change 3000 km/ 120 hours
REV 3 (250cc) (2007-2008)
  • Use: Normal
  • Between min and max.
  • Check 1000 km/ 40 hours
  • Change 3000 km/ 120 hours
REV 3 (270cc) (2007-2008)
  • Use: Normal
  • Between min and max.
  • Check 1000 km/ 40 hours
  • Change 3000 km/ 120 hours
REV 4T (2007-2008)
  • Use: Normal
  • Between min and max.
  • Check 10 hours
  • Change 100 hours/ 12 months

Additional Notes

  • All five REV configurations across 2007-2008 use a hydraulic clutch system, meaning clutch engagement is controlled by fluid pressure rather than a mechanical cable.
  • The Beta REV 3 variants in 125cc, 200cc, 250cc, and 270cc displacements share identical clutch fluid service intervals for 2007-2008, with a check interval of 1,000 km or 40 hours and a change interval of 3,000 km or 120 hours under normal use conditions.
  • Clutch fluid capacity for all REV configurations is expressed as a reservoir level range rather than a fixed volume, meaning the correct fill level falls between the minimum and maximum marks on the reservoir rather than a measured quantity in milliliters or fluid ounces.
  • The REV 4T carries a notably shorter check interval of 10 hours compared to the 40-hour check interval shared across the two-stroke REV 3 variants, reflecting a different service cadence for the four-stroke engine configuration.
  • The REV 4T clutch fluid change interval is specified as 100 hours or 12 months, whichever comes first under normal use conditions, introducing a calendar-based limit not present in the REV 3 specifications.
  • The REV 3 change interval of 120 hours is longer than the REV 4T's 100-hour limit, though the REV 4T adds the 12-month calendar threshold as an additional boundary for the fluid change.

Other Systems