Benelli Tre
Coolant capacity & service interval
Benelli Tre uses coolant with a capacity range of 2.5 to 3.0 liters. Service intervals occur every 20000 km or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Tre 1130 K (2011-2016) |
|
| Tre 1130 K Amazonas (2011-2016) |
|
| Tre 899 K (2011-2012) |
|
| Tre 1130 K (2006-2010) |
|
| Tre 1130 K Amazonas (2006-2010) |
|
Additional Notes
- All Benelli Tre variants listed across the 2006-2016 model years share an identical coolant service interval of 20,000 km or 24 months, whichever comes first, under normal use conditions.
- The coolant capacity specification for every listed Tre variant is expressed as a fill range rather than a fixed volume, with the correct level falling between the minimum and maximum marks on the reservoir or sight glass.
- A range-based fill specification, as used across all Tre cooling systems here, is standard for service-fill top-ups and routine changes, where the technician references physical level indicators rather than pouring a predetermined measured quantity.
- The Tre 1130 K and Tre 1130 K Amazonas each span two consecutive specification groups, covering 2006-2010 and 2011-2016, yet both groups carry identical coolant level and interval values throughout.
- The Tre 899 K, with a smaller 899 cc displacement compared to the 1130 cc variants, shares the same 20,000 km / 24-month coolant change interval and the same min-to-max fill specification.
- The 24-month time limit on the coolant change interval reflects the chemical degradation of coolant additives over time, which occurs independently of mileage accumulation.