Benelli 752S

Coolant capacity & service interval

Benelli 752S coolant capacity ranges from 0,3 to 2,4 liters. Service intervals occur every 25000 km or 36 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
752S (2020- )
  • Use: Normal
  • Capacity 2,4 liter
  • Capacity 0,3 liter (Reservoir)
  • Change 25000 km/ 36 months

Additional Notes

  • The Benelli 752S cooling system carries a main circuit capacity of 2.4 liters, which reflects the total volume required when filling after a full drain or overhaul of the system.
  • A separate reservoir capacity of 0.3 liters is listed alongside the main circuit figure, indicating the expansion tank holds a modest additional volume independent of the primary cooling circuit fill.
  • The coolant change interval is set at 25,000 km or 36 months, whichever comes first, under normal use conditions.
  • The 36-month time limit on the coolant change interval means a calendar-based threshold applies even when the mileage figure has not been reached, which is common for coolant specifications given the chemical degradation of corrosion inhibitors over time.