Arctic Cat Pantera
Brake fluid capacity & service interval
Arctic Cat Pantera brake fluid capacity ranges from min to max. Service intervals include normal use. Data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Bearcat 7000 XT Limited (2016-2020) |
|
| Pantera 3000 (2016-2020) |
|
| Pantera 7000 (2015-2020) |
|
Additional Notes
- The Arctic Cat Pantera brake fluid specification applies to the hydraulic brake system across all listed configurations, with the accepted fill level defined as anywhere between the reservoir's minimum and maximum markers.
- The Pantera 7000 carries the earliest model year coverage among the listed configurations, with specifications beginning in 2015, while the Pantera 3000 and Bearcat 7000 XT Limited both begin in 2016.
- All three configurations share an identical fill specification, meaning no configuration calls for a higher or lower fluid level relative to the reservoir's marked range.
- The "between min and max" specification reflects a reservoir-level check rather than a measured volume fill, which is standard practice for hydraulic brake systems where fluid is not drained and replaced by a fixed capacity amount during routine service.
- All listed configurations carry a normal use condition designation, meaning the brake fluid level specification applies under standard operating circumstances rather than a separate severe-use or first-change interval.