Aprilia Shiver
Coolant capacity & service interval
Aprilia Shiver coolant capacity is 1,8 liters. Service intervals include checks at 5000 km, 10000 km, and 20000 km, with fluid changes at 12 months and 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Shiver 900 (2017- ) |
|
| Shiver 750 GT (2009-2011) |
|
| Shiver 750 (2008-2017) |
|
| Shiver 750 (2008-2017) |
|
Additional Notes
- The Aprilia Shiver 750 and Shiver 900 both carry a coolant capacity of 1.8 liters, which represents a full cooling system fill volume.
- On the Shiver 750 under normal use conditions, the coolant check interval is set at 10,000 km, with a change interval of 24 months.
- Under severe use conditions, the Shiver 750 cooling system requires a check at 5,000 km and a coolant change every 12 months, cutting both intervals in half compared to normal use.
- The Shiver 750 GT, covering model years 2009-2011, shares the 1.8-liter capacity and the 24-month change interval with the standard Shiver 750 under normal use, though no mileage-based check interval is listed for the GT variant.
- The Shiver 900, introduced from 2017, extends the mileage-based check interval to 20,000 km under normal use conditions, doubling the 10,000 km figure associated with the Shiver 750 under the same conditions.
- Despite the difference in engine displacement between the 750 and 900 variants, the cooling system capacity remains consistent at 1.8 liters across all listed configurations.
- The 24-month coolant change interval appears across the Shiver 750, Shiver 750 GT, and Shiver 900 under normal use, making calendar time the shared baseline for coolant replacement regardless of variant.