Aprilia Dorsoduro
Clutch fluid capacity & service interval
Aprilia Dorsoduro clutch fluid capacity ranges between min and max. Service intervals include 1000 km, 20000 km, and 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Dorsoduro 900 (2017- ) |
|
| Dorsoduro 750 (2010-2017) |
|
| Dorsoduro Factory (2010-2011) |
|
| Dorsoduro (2008-2009) |
|
| Dorsoduro (2008-2009) |
|
Additional Notes
- The Aprilia Dorsoduro clutch fluid level is maintained between a minimum and maximum mark rather than expressed as a fixed volume, which is standard for hydraulic clutch reservoirs where the fluid level is managed through top-up rather than a full drain-and-fill service.
- The 2008-2009 Dorsoduro includes an initial service check at 1000 km, a separate interval from the normal 20000 km check schedule. Early inspection intervals like this are common after a break-in period to catch any fluid contamination or air ingestion that may occur as new seals and hoses settle.
- Under normal use conditions, the 2008-2009 Dorsoduro specifies both a distance-based check at 20000 km and a time-based fluid change at 24 months. The combination of both criteria reflects the hygroscopic nature of brake and clutch fluid, which absorbs moisture over time regardless of mileage.
- The Dorsoduro 750 (2010-2017) and Dorsoduro Factory (2010-2011) share the same normal-use specification: a fluid change at 24 months with no distance-based check interval listed. This differs from the 2008-2009 configuration, which includes the additional 20000 km check.
- The Dorsoduro 900 (2017- ) returns to the same dual-interval structure seen on the 2008-2009 model, specifying both a 20000 km check and a 24-month fluid change under normal use conditions.
- The Factory trim, produced for 2010-2011, carries identical clutch fluid service intervals to the standard Dorsoduro 750 of the same period, indicating no variation in hydraulic clutch service requirements between the two configurations despite the Factory designation typically denoting a higher-specification build.