Vauxhall Vivaro C, K0

Automatic transmission fluid capacity & service interval

Vauxhall Vivaro C, K0 automatic transmission fluid capacity ranges from 3,5 to 6,8 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Vivaro C 2.0 Diesel (106 kW), EHS, EHT (2020- )
  • Use: Normal
  • Capacity 6,8 liter (Dry fill)
  • Capacity 3,5-4 liter (Service fill)
  • Code: AMN8 8/1
Vivaro C 2.0 Diesel (130 kW), EHZ (2019- )
  • Use: Normal
  • Capacity 6,8 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AMN8 8/1

Additional Notes

  • The Vauxhall Vivaro C, K0 automatic transmission fluid specifications cover two 2.0 Diesel configurations, each paired with an automatic transaxle.
  • Both the 106 kW and 130 kW variants share a dry fill capacity of 6.8 liters, a figure that reflects the total fluid volume required when filling a completely drained or newly assembled transmission with no residual fluid present.
  • The service fill capacity for the 130 kW EHZ variant is 3.5 liters under normal use conditions, representing the partial volume exchanged during a routine fluid service where the torque converter and internal passages retain fluid.
  • The 106 kW EHS and EHT variants carry a service fill range of 3.5 to 4.0 liters under normal use conditions, indicating a slightly wider variance compared to the single 3.5-liter figure specified for the 130 kW EHZ.
  • The gap between the 6.8-liter dry fill and the 3.5-to-4.0-liter service fill across both configurations is consistent with the portion of fluid that remains trapped in the transmission assembly during a standard drain procedure.

Other Systems