Vauxhall Movano C, U9

Manual transmission fluid capacity & service interval

Vauxhall Movano C, U9 manual transmission fluid capacity ranges from 2,2 to 2,9 liters. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Movano 2.2 BlueHDi 120 (2024- )
  • Use: Normal
  • Capacity 2,2 liter
  • Code: C637 6/1
Movano 2.2 BlueHDi 120 (2024- )
  • Use: Normal
  • Capacity 2,9 liter
  • Code: M40 6/1
Movano 2.2 BlueHDi 140 (2024- )
  • Use: Normal
  • Capacity 2,2 liter
  • Code: C637 6/1
Movano 2.2 BlueHDi 140 (2024- )
  • Use: Normal
  • Capacity 2,9 liter
  • Code: M40 6/1
Movano 2.2 BlueHDi 180 (2024- )
  • Use: Normal
  • Capacity 2,2 liter
  • Code: C637 6/1
Movano 2.2 BlueHDi 180 (2024- )
  • Use: Normal
  • Capacity 2,9 liter
  • Code: M40 6/1
Movano 2.2 Diesel 120 (2021-2024)
  • Use: Normal
  • Capacity 2,9 liter
  • Code: MLGU6 6/1
Movano 2.2 Diesel 140 (2021-2024)
  • Use: Normal
  • Capacity 2,9 liter
  • Code: MLGU6 6/1
Movano 2.2 Diesel 165 (2021-2024)
  • Use: Normal
  • Capacity 2,9 liter
  • Code: MLGU6 6/1

Additional Notes

  • All 2.2 Diesel variants of the Vauxhall Movano C, U9 covering the 120, 140, and 165 horsepower outputs from 2021-2024 share a single manual transaxle fluid capacity of 2.9 liters, with no variation across power outputs within that engine family.
  • The 2.2 BlueHDi variants introduced from 2024 onward list two distinct manual transaxle capacities — 2.2 liters and 2.9 liters — indicating that two different gearbox units are fitted depending on the specific configuration, rather than a single unit across the range.
  • A transaxle combines the transmission and axle differential into one housing, meaning the listed capacities cover the entire integrated unit rather than a standalone gearbox alone.
  • The 2.2-liter capacity figure listed for the BlueHDi 120, 140, and 180 variants represents a notably smaller fill volume compared to the 2.9-liter figure also listed for those same variants, a difference of 0.7 liters that typically distinguishes a service drain-and-refill quantity from a full overhaul or dry-fill capacity.
  • All capacity figures across every row are specified under normal use conditions, meaning none of the listed values carry a severe-use or first-change-only designation that would alter the applicable fill quantity.
  • The three BlueHDi power outputs — 120, 140, and 180 — each carry identical dual capacity listings of 2.2 and 2.9 liters, showing no differentiation in transaxle fluid volume requirements across the BlueHDi power range.

Other Systems