Toyota Hilux, N40 / N50 (EU)

Transfer case fluid capacity & service interval

Toyota Hilux, N40 / N50 (EU) transfer case fluid capacity is 1,6 liters. Service intervals include checking at 20000 km and changing at 40000 km or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Hilux 2.2 4WD (1989-1996)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 20000 km
  • Change 40000 km/ 24 months
Hilux 2.4 4WD (1989-1996)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 20000 km
  • Change 40000 km/ 24 months
Hilux 2.4 D 4WD (1989-1998)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 20000 km
  • Change 40000 km/ 24 months
Hilux 1.8 4WD (1984-1996)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 20000 km
  • Change 40000 km/ 24 months
Hilux 2.0 4WD (1984-1996)
  • Use: Normal
  • Capacity 1,6 liter
Hilux 2.4 D 4WD (1984-1989)
  • Use: Normal
  • Capacity 1,6 liter
  • Check 20000 km
  • Change 40000 km/ 24 months

Additional Notes

  • A uniform transfer case fluid capacity of 1.6 liters applies across all Toyota Hilux N40/N50 (EU) 4WD variants listed, spanning petrol engines from 1.8 to 2.4 liters and the 2.4 D diesel. In transfer case servicing, a consistent capacity across different engine displacements typically reflects a shared transfer unit design rather than engine-specific hardware.
  • The Toyota Hilux 2.0 4WD (1984-1996) carries the same 1.6-liter transfer case capacity as the other variants but has no check or change interval listed in the specifications, making the capacity figure the sole recorded data point for that configuration.
  • For the Hilux 1.8 4WD (1984-1996), 2.2 4WD (1989-1996), 2.4 4WD (1989-1996), and both 2.4 D 4WD entries, the specified check interval under normal use conditions is every 20,000 km. A check interval shorter than the change interval is standard practice, allowing fluid condition and level to be monitored without a full drain-and-refill at each visit.
  • The fluid change interval for all variants with interval data is 40,000 km or 24 months under normal use conditions, whichever comes first. The dual criterion of distance and time reflects that fluid degradation can occur through calendar aging even when mileage accumulation is low.
  • The 2.4 D 4WD configuration appears across two separate year ranges: 1984-1989 and 1989-1998. Both share identical transfer case specifications, including the 1.6-liter capacity and the 20,000 km check and 40,000 km/24-month change intervals under normal use conditions.
  • All entries are designated for normal use conditions. In vehicle servicing contexts, normal use typically refers to on-road operation within moderate temperature ranges and standard load cycles, as opposed to severe use, which would involve off-road driving, towing, or extreme climates and often carries shortened service intervals.
  • The petrol variants with interval data span from 1984 through 1996, while the 2.4 D diesel extends to 1998. Across all of these, the transfer case service schedule remains unchanged, indicating no revision to the interval specifications over the production period covered.

Other Systems