Toyota Dyna (EU)
Automatic transmission fluid capacity & service interval
Toyota Dyna (EU) uses automatic transmission fluid with a capacity of 2,4 liters. Service intervals include checks at 20000 km/24 months and changes at 40000 km/48 months. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Dyna 100 2.4 D (1985-1995) |
|
Additional Notes
- The Dyna 100 2.4 D automatic transmission holds 2.4 liters, a figure consistent with a service fill rather than a full overhaul capacity, meaning fluid is exchanged through a drain-and-fill procedure without disassembling the transmission unit.
- The check interval for the Toyota Dyna 100 2.4 D automatic transmission fluid is set at 20,000 km or 24 months, whichever comes first, under normal use conditions.
- The change interval runs at 40,000 km or 48 months under normal use, which is exactly double the check interval in both distance and time, reflecting a structured two-stage maintenance cycle.
- The normal use condition tied to both the check and change intervals indicates the specifications apply to standard operating environments, as opposed to severe-duty cycles such as frequent towing, extreme temperatures, or stop-and-go urban driving.
- A single capacity figure of 2.4 liters applies across the full 1985-1995 production span of the Dyna 100 2.4 D, with no variation recorded across model years within that range.