Sterling 360

Automatic transmission fluid capacity & service interval

Sterling 360 uses automatic transmission fluid with a capacity range of 6,4 to 12,9 liters. Service intervals include checks at 6000 miles and changes at 24000 miles. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
360 4x2 (2007-2010)
  • Use: Normal
  • Capacity 12,9 liter (Dry fill)
  • Capacity 6,4 liter (Service fill)
  • Check 6000 miles
  • Change 24000 miles
  • Code: 6/1

Additional Notes

  • The Sterling 360 4x2 carries a dry fill capacity of 12.9 liters for the automatic transmission, a figure that reflects the total fluid volume required when filling a completely drained or rebuilt unit, including the torque converter and all internal passages.
  • The service fill capacity of 6.4 liters is roughly half the dry fill volume, which is consistent with a standard drain-and-fill procedure where residual fluid remains in the torque converter and valve body after the pan is dropped.
  • Under normal use conditions, the automatic transmission fluid on the 360 4x2 is specified for a change interval of 24,000 miles, with an intermediate fluid level check interval set at 6,000 miles.
  • The 6,000-mile check interval indicates that fluid level monitoring is treated as a separate maintenance event from the full fluid change, occurring four times within each 24,000-mile change cycle.

Other Systems