Renault Master II, X70 (EU)

Differential fluid capacity & service interval

Renault Master II, X70 (EU) differential fluid capacities range from 4.2 liters to 6 liters depending on configuration, with some including hub reductions. Four configurations are covered in the data.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Master II Propulsion 3.0 dCi (110 kW) (2008-2010)
  • Rear
  • Use: Normal
  • Capacity 4,2 liter
  • Capacity 4,7 liter (+ hub reductions)
  • Code: P 569
  • Master II Propulsion 3.0 dCi (110 kW) (2008-2010)
  • Rear
  • Use: Normal
  • Capacity 5,5 liter
  • Capacity 6 liter (+ hub reductions)
  • Code: P 669
  • Master II Propulsion 3.0 dCi (95 kW) (2007-2010)
  • Rear
  • Use: Normal
  • Capacity 4,2 liter
  • Capacity 4,7 liter (+ hub reductions)
  • Code: P 569
  • Master II Propulsion 3.0 dCi (95 kW) (2007-2010)
  • Rear
  • Use: Normal
  • Capacity 5,5 liter
  • Capacity 6 liter (+ hub reductions)
  • Code: P 669

Additional Notes

  • The Renault Master II, X70 (EU) Propulsion variants equipped with the 3.0 dCi engine list two distinct rear differential capacity figures within the same configuration, indicating that the specifications cover more than one axle type rather than a single unit.
  • A base rear differential capacity of 4.2 liters rises to 4.7 liters when hub reductions are present, reflecting the additional fluid volume required to service the hub reduction assemblies alongside the differential itself.
  • A second, larger rear differential variant carries a base capacity of 5.5 liters, which increases to 6.0 liters with hub reductions, pointing to a heavier-duty axle unit used in certain Propulsion configurations.
  • The 0.5-liter increment added by hub reductions appears consistently across both axle sizes, applying equally to the 4.2-liter unit and the 5.5-liter unit in the specifications.
  • Both the 110 kW and 95 kW outputs of the 3.0 dCi engine share identical rear differential capacity figures, meaning output level alone does not determine which axle size is fitted.
  • The 110 kW variant covers model years 2008-2010, while the 95 kW variant spans 2007-2010, giving the lower-output engine a one-year earlier introduction within the covered period.
  • All four rows carry a Normal use condition, meaning the listed capacities apply to standard operating circumstances without a separate severe-duty or first-change interval distinction in the specifications.

Other Systems