Ram Trucks Dakota, ND (USA / CAN)
Brake fluid capacity & service interval
Ram Trucks Dakota, ND (USA / CAN) requires brake fluid with a capacity range between min and max. Service intervals include normal use. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Dakota 3.7 V6 (4x2), ND (2010-2011) |
|
| Dakota 3.7 V6 (4x4), ND (2010-2011) |
|
| Dakota 4.7 V8 (4x2) (USA), ND (2010-2011) |
|
| Dakota 4.7 V8 (4x4) (USA), ND (2010-2011) |
|
Additional Notes
- All four configurations of the Ram Trucks Dakota ND cover the 2010-2011 model years, spanning both the 3.7 V6 and 4.7 V8 engine options, each available in 4x2 and 4x4 drivetrain variants.
- The brake fluid specification across all configurations is expressed as a reservoir level rather than a fixed volume, meaning the correct fill is determined by the position of the fluid between the minimum and maximum marks on the reservoir rather than by adding a measured quantity.
- The 4.7 V8 configurations carry a USA market designation, distinguishing those entries from the broader ND (USA / CAN) regional scope shared by the 3.7 V6 configurations.
- All four configurations reference a hydraulic brake system, which is the conventional closed-loop circuit where brake fluid transmits pedal force to the wheel braking components under pressure.
- The use condition for all listed configurations is normal, meaning the specified reservoir level range applies under standard operating conditions rather than severe or special-use scenarios.
- The between-min-and-max specification is consistent across both engine displacements and both drivetrain types, indicating no variation in the reservoir-level guidance based on powertrain or axle configuration.