Piaggio Quargo

Coolant capacity & service interval

Piaggio Quargo coolant capacity is 5,5 liters. Service intervals include checks at 1000 km and 7500 km, with changes at 15000 km or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Quargo Disco, LDW 702/P
  • Use: Normal
  • Capacity 5,5 liter
  • Check 7500 km
  • Change 15000 km/ 12 months
Quargo Disco, LDW 702/P
  • Use: Initial service
  • Capacity 5,5 liter
  • Check 1000 km
Quargo, LDW 702/P
  • Use: Normal
  • Capacity 5,5 liter
  • Check 7500 km
  • Change 15000 km/ 12 months
Quargo, LDW 702/P
  • Use: Initial service
  • Capacity 5,5 liter
  • Check 1000 km

Additional Notes

  • The Piaggio Quargo and Quargo Disco, both fitted with the LDW 702/P engine, share an identical cooling system capacity of 5.5 liters, indicating a consistent system volume across the two variants.
  • Under normal use conditions, the coolant change interval is set at 15,000 km or 12 months, whichever comes first, meaning time elapsed can trigger a service requirement even before the distance threshold is reached.
  • The normal use check interval is 7,500 km, which falls at the halfway point of the full change interval, allowing for a mid-cycle inspection of coolant condition and level before the scheduled replacement.
  • An initial service check is specified at 1,000 km for both the Quargo and Quargo Disco with the LDW 702/P engine, reflecting an early-life inspection point separate from the standard recurring service schedule.
  • The initial service entry carries no change interval, only a check at 1,000 km, distinguishing it from the normal use schedule where both check and change intervals are defined.

Other Systems