Peugeot Partner, K9

Automatic transmission fluid capacity & service interval

Peugeot Partner K9 automatic transmission fluid capacity ranges from 2,5 to 6 liters. Service intervals are not specified. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Partner 1.2 PureTech 130, HNS (2018- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1
Partner 1.5 BlueHDi 130, YHZ (2018- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: ATN8 8/1

Additional Notes

  • The Peugeot Partner K9 1.2 PureTech 130 (HNS) and 1.5 BlueHDi 130 (YHZ) both share a dry fill capacity of 6 liters, which represents the total fluid volume required when filling a completely drained or rebuilt automatic transaxle from empty.
  • The service fill capacity for the 1.2 PureTech 130 (HNS) falls within a range of 2.5 to 3.5 liters under normal use conditions, reflecting the variable amount of fluid retained in the torque converter and passages during a standard drain-and-fill service.
  • The 1.5 BlueHDi 130 (YHZ) carries a fixed service fill capacity of 3.5 liters under normal use conditions, sitting at the upper boundary of the range specified for the petrol variant's service fill.
  • The gap between the 6-liter dry fill and the lower service fill figures across both configurations illustrates how a significant portion of automatic transmission fluid remains trapped in the system during a routine service, making a full dry fill volume relevant only in overhaul or replacement scenarios.
  • Both configurations are classified as automatic transaxles, meaning the transmission and final drive share a common fluid sump, which is reflected in the relatively substantial dry fill volume of 6 liters across both engine variants.

Other Systems