Opel Vivaro C

Automatic transmission fluid capacity & service interval

Opel Vivaro C automatic transmission fluid capacity ranges from 3,5 to 6,8 liters. Service intervals are not specified. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Vivaro C 2.0 Diesel (106 kW), EHS, EHT (2020- )
  • Use: Normal
  • Capacity 6,8 liter (Dry fill)
  • Capacity 3,5-4 liter (Service fill)
  • Code: AMN8 8/1
Vivaro C 2.0 Diesel (130 kW), EHZ (2019- )
  • Use: Normal
  • Capacity 6,8 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AMN8 8/1

Additional Notes

  • The Opel Vivaro C 2.0 Diesel (106 kW) in EHS and EHT variants carries a dry fill capacity of 6.8 liters, a figure that reflects the total fluid volume required when filling a completely drained or newly assembled automatic transaxle from empty.
  • The service fill capacity for the 106 kW variant is listed as a range of 3.5 to 4 liters, meaning the actual amount needed during a routine fluid change can vary within that window depending on how completely the system drains.
  • The 130 kW EHZ variant shares the same 6.8-liter dry fill capacity as the 106 kW variants, indicating both configurations use the same automatic transaxle total volume.
  • Where the two power outputs diverge is in the service fill: the 130 kW EHZ variant specifies a fixed 3.5 liters, while the 106 kW variants allow for up to 4 liters, suggesting a tighter refill tolerance in the higher-output configuration.
  • Both rows are designated for normal use conditions, meaning the listed capacities apply to standard operating environments rather than severe-duty cycles.
  • The 2019 starting year applies exclusively to the 130 kW EHZ variant, while the 106 kW EHS and EHT variants carry a 2020 starting year, placing the higher-output automatic transaxle application one model year earlier in the Vivaro C lineup.

Other Systems