Nissan Q-bic (EU)
Manual transmission fluid capacity & service interval
Nissan Q-bic (EU) manual transmission fluid capacity is 2,9 liters. Service intervals include checking at 45000 km or 12 months and changing at 60000 km or 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Q-bic 1.6 (Y10) (1992-1996) |
|
| Q-bic 1.6i (Y10) (1992-1996) |
|
| Q-bic 1.7 D (Y10) (1992-1996) |
|
Additional Notes
- The Nissan Q-bic (EU) manual transaxle fluid capacity is 2.9 liters across the 1.6, 1.6i, and 1.7 D variants for the 1992-1996 model years, indicating a service fill volume rather than a full overhaul drain figure in most practical maintenance contexts.
- All three variants share an identical check interval of 45,000 km or 12 months under normal use conditions, meaning the fluid level is inspected on whichever threshold arrives first.
- The 1.6i and 1.7 D variants carry a fluid change interval of 60,000 km or 24 months under normal use conditions, which is a separate and longer cycle than the check interval specified for the same configurations.
- The 1.6 (non-i) variant lists only a check interval and no change interval in its specifications, distinguishing it from the 1.6i and 1.7 D entries that include both check and change intervals.
- The 2.9-liter transaxle capacity is consistent across the petrol and diesel powertrains in the Y10 platform, with no variation tied to engine type within the 1992-1996 range.
- The 60,000 km change interval on the 1.6i and 1.7 D is exactly double the 30,000 km increment that separates the check interval from the change interval, reflecting a structured two-stage maintenance schedule under normal use.