Nissan Kubistar, X76 (EU)
Coolant capacity & service interval
Nissan Kubistar, X76 (EU) coolant capacity ranges from 5 to 7,9 liters. Service intervals include checks at 30000 km or 24 months and changes at 120000 km or 48 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Kubistar 1.2 (2003-2010) |
|
| Kubistar 1.5 dCi (42 kW) (2003-2010) |
|
| Kubistar 1.5 dCi (48 kW) (2003-2010) |
|
| Kubistar 1.5 dCi (60 kW) (2003-2010) |
|
| Kubistar 1.6 16V (2003-2010) |
|
Additional Notes
- The Nissan Kubistar X76 cooling system capacities vary by engine, ranging from 5 liters in the 1.2-liter petrol variant up to 7.9 liters in the 1.6 16V, with the 1.5 dCi variants sitting at 6.4 liters regardless of power output.
- The 1.2-liter engine's 5-liter cooling system capacity is the smallest across the Kubistar X76 range, consistent with a smaller displacement single-overhead-cam petrol unit generating less heat load than larger or turbocharged alternatives.
- All three 1.5 dCi variants, rated at 42 kW, 48 kW, and 60 kW respectively, share an identical 6.4-liter cooling system capacity, indicating the same base engine block and cooling jacket dimensions across those power outputs.
- The 1.6 16V petrol engine carries the largest cooling system capacity in the range at 7.9 liters. A 16-valve configuration typically involves a more complex cylinder head with greater surface area, which can contribute to a larger coolant volume requirement.
- Coolant checks are specified at 30,000 km or 24 months under normal use conditions across all five Kubistar X76 engine variants, establishing a consistent inspection interval regardless of engine type.
- The coolant change interval for all Kubistar X76 variants is 120,000 km or 48 months under normal use conditions. A 48-month or 120,000 km drain interval is typical of long-life coolant formulations, which use organic acid technology (OAT) or similar inhibitor packages designed to resist degradation over extended periods.
- The ratio between the check interval (30,000 km / 24 months) and the change interval (120,000 km / 48 months) means coolant condition is inspected four times before a full drain and refill is due, allowing early detection of contamination or inhibitor depletion without requiring premature fluid replacement.