Multicar M

Coolant capacity & service interval

Multicar M coolant specifications cover a capacity range of 12 to 15 liters. The data includes four configurations. The fluid type specified is coolant for normal use.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
M27 Euro 5 + DPF (2010-2014)
  • Use: Normal
  • Capacity 12 liter
M31 Euro 5 + DPF (2010-2014)
  • Use: Normal
  • Capacity 15 liter
M30 Euro 4 + DPF (2008-2010)
  • Use: Normal
  • Capacity 15 liter
M30 Euro 3 (2002-2007)
  • Use: Normal
  • Capacity 15 liter

Additional Notes

  • The Multicar M27 Euro 5 + DPF (2010-2014) cooling system holds 12 liters of coolant, a notably smaller capacity compared to the other engine variants listed for the same model range.
  • The M30 Euro 3 (2002-2007) and M30 Euro 4 + DPF (2008-2010) both share a 15-liter cooling system capacity, indicating no change in the cooling system volume between those two emission standard generations of the M30 engine.
  • The M31 Euro 5 + DPF (2010-2014) also carries a 15-liter cooling system capacity, placing it in line with both M30 variants despite being a different engine designation.
  • All four configurations are specified under normal use conditions, meaning the 12-liter and 15-liter figures apply to standard operating environments rather than severe-duty cycles.
  • The 3-liter difference between the M27 and the M30/M31 variants reflects a meaningful distinction in cooling system volume, which typically corresponds to differences in engine displacement, block size, or the extent of the cooling circuit.
  • The addition of a diesel particulate filter (DPF) across the Euro 4 and Euro 5 variants of the M30 and M31 did not alter the 15-liter cooling system capacity relative to the earlier Euro 3 M30 specification.

Other Systems