Mitsubishi Fuso Canter (USA)

Manual transmission fluid capacity & service interval

Mitsubishi Fuso Canter (USA) manual transmission fluid capacity is 3,6 liters. Service intervals include checks at 6000 miles and changes at 2500 miles or 18000 miles. The data covers 20 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
FG140 (4X4), FG84D (2007-2010)
  • Use: Normal
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FG140 (4X4), FG84D (2007-2010)
  • Use: Initial service
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FG140 (4X4), FG84D (2007-2010)
  • Use: Severe
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FG140 (4X4), FG84D (2007-2010)
  • Use: Initial service, severe
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FE120 (110 kW), FE83D (2004-2007)
  • Use: Normal
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FE120 (110 kW), FE83D (2004-2007)
  • Use: Initial service
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FE120 (110 kW), FE83D (2004-2007)
  • Use: Severe
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FE120 (110 kW), FE83D (2004-2007)
  • Use: Initial service, severe
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FE140 (110 kW), FE84D (2004-2007)
  • Use: Normal
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FE140 (110 kW), FE84D (2004-2007)
  • Use: Initial service
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FE140 (110 kW), FE84D (2004-2007)
  • Use: Severe
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FE140 (110 kW), FE84D (2004-2007)
  • Use: Initial service, severe
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FE145 (110 kW), FE84D (2004-2007)
  • Use: Normal
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FE145 (110 kW), FE84D (2004-2007)
  • Use: Initial service
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FE145 (110 kW), FE84D (2004-2007)
  • Use: Severe
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FE145 (110 kW), FE84D (2004-2007)
  • Use: Initial service, severe
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FG140 (4X4), FG84D (2004-2007)
  • Use: Normal
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FG140 (4X4), FG84D (2004-2007)
  • Use: Initial service
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1
FG140 (4X4), FG84D (2004-2007)
  • Use: Severe
  • Capacity 3,6 liter
  • Check 6000 miles
  • Change 18000 miles
  • Code: 5/1
FG140 (4X4), FG84D (2004-2007)
  • Use: Initial service, severe
  • Capacity 3,6 liter
  • Change 2500 miles
  • Code: 5/1

Additional Notes

  • The Mitsubishi Fuso Canter (USA) manual transmission fluid capacity is 3.6 liters across all listed configurations, covering the FE83D, FE84D, and FG84D engine codes for the 2004-2010 model range.
  • A 3.6-liter fill volume is consistent with a service fill rather than a full overhaul capacity, as overhaul figures typically account for additional fluid retained in disassembled components and tend to run higher.
  • An initial service change interval of 2,500 miles applies to all listed configurations, both under normal and severe use conditions. Early fluid changes at low mileage are standard practice for new or rebuilt manual transmissions, as break-in wear particles accumulate rapidly during initial operation.
  • Under normal use conditions, the ongoing check interval is 6,000 miles and the change interval is 18,000 miles. The same check and change intervals apply under severe use conditions, meaning no reduction in mileage between services is specified for severe operation beyond the initial service requirement.
  • The FE120, FE140, and FE145 configurations all share the 110 kW power rating and use the FE83D or FE84D engine code for the 2004-2007 period. Despite differences in model designation, all carry identical manual transmission fluid capacities and service intervals.
  • The FG140 (4X4) with the FG84D engine is the only four-wheel-drive configuration in the listed data. The 4X4 designation refers to the drivetrain layout, yet the manual transmission fluid capacity of 3.6 liters and all associated service intervals remain identical to the two-wheel-drive FE-series configurations.
  • The FG84D engine code spans two separate year ranges in the data: 2004-2007 and 2007-2010. Both ranges carry the same 3.6-liter capacity and the same check, change, and initial service intervals, indicating no specification change across the production transition.

Other Systems