Kia Carnival/Sedona, YP (EU)

Power steering fluid capacity & service interval

Kia Carnival/Sedona, YP (EU) uses power steering fluid with a capacity of 1 liter. Service intervals consist of checks every 15000 km or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Carnival 2.2 CRDi (2019-2019)
  • Use: Normal
  • Capacity 1 liter
  • Check 15000 km/ 12 months
Carnival 2.2 CRDi DPF (2019-2019)
  • Use: Normal
  • Capacity 1 liter
  • Check 15000 km/ 12 months
Carnival 2.2 CRDi (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 15000 km/ 12 months
Carnival 2.2 CRDi DPF (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 15000 km/ 12 months

Additional Notes

  • All four configurations listed for the Kia Carnival/Sedona YP (EU) share an identical power steering fluid capacity of 1 liter, which is a typical reservoir fill volume for a hydraulic power steering system in a vehicle of this class.
  • The check interval of 15,000 km or 12 months, whichever comes first, applies uniformly across all listed configurations under normal use conditions. A time-based limit of 12 months runs alongside the distance-based interval, meaning annual inspection is required even when mileage accumulation is low.
  • The 2.2 CRDi and 2.2 CRDi DPF variants share the same 1-liter capacity and 15,000 km/12-month check interval for 2015-2018, indicating no difference in power steering system specification between the standard diesel and the diesel particulate filter-equipped variant within that period.
  • The 2019 model year entries for both the 2.2 CRDi and 2.2 CRDi DPF carry forward the same 1-liter capacity and check interval as the 2015-2018 entries, reflecting continuity in the hydraulic power steering specification across the full 2015-2019 span covered.
  • A check interval rather than a fluid replacement interval is specified for all configurations. In hydraulic power steering systems, periodic checks typically involve inspecting fluid level and condition rather than scheduled full fluid exchanges, which distinguishes power steering service from fluid systems with defined drain-and-fill intervals.

Other Systems