Iveco Daily 42
Manual transmission fluid capacity & service interval
Iveco Daily 42 manual transmission fluid capacity is 1,8 to 2,2 liters. Service intervals are 350000 km or 120 months and 350000 km or 60 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Daily 42 S 14 (2024- ) |
|
| Daily 42 S 16 (2024- ) |
|
| Daily 42 S 18 (2024- ) |
|
| Daily 42 S 21 (2024- ) |
|
Additional Notes
- All four Iveco Daily 42 variants listed share a manual transmission fluid capacity range of 1.8 to 2.2 liters. A stated range rather than a fixed value typically reflects variation between a drain-and-fill service quantity and the full dry or overhaul fill, with the lower figure representing a partial drain refill and the upper figure representing a complete fluid replacement after full disassembly.
- The 350,000 km distance interval applies uniformly across the Daily 42 S 14, S 16, S 18, and S 21 under normal use conditions. At this mileage threshold, 350,000 km represents an exceptionally long service interval by industry standards, consistent with modern sealed or long-life transmission fluid specifications designed for extended commercial vehicle service cycles.
- The Daily 42 S 14 carries a time-based interval of 120 months under normal use conditions, which equals a 10-year calendar limit alongside the 350,000 km distance trigger. Whichever threshold is reached first would govern the service requirement.
- The Daily 42 S 16, S 18, and S 21 share a time-based interval of 60 months under normal use conditions, equal to 5 years. This is half the 120-month time limit assigned to the S 14, despite all four variants sharing the same 350,000 km distance interval and the same fluid capacity range.
- The difference in time intervals between the S 14 at 120 months and the S 16, S 18, and S 21 at 60 months suggests a specification distinction tied to the output or load rating of each variant. The S-number designation in Iveco Daily nomenclature typically denotes gross vehicle weight class, with higher numbers indicating heavier-duty configurations, which may correlate with differing fluid degradation expectations over time.