Hyundai Tucson, JM (EU)
Transfer case fluid capacity & service interval
Hyundai Tucson, JM (EU) requires transfer case fluid with a capacity of 0,8 liter. Service intervals include checking at 40000 km and changing at 100000 km. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Tucson 2.0 CRDi 16V (2004-2009) |
|
Additional Notes
- The Hyundai Tucson JM (EU) 2.0 CRDi 16V transfer case holds 0.8 liter of fluid, a relatively small volume consistent with compact transfer box designs used in crossover-class all-wheel-drive systems.
- The inspection interval for the transfer case fluid is set at 40,000 km under normal use conditions, meaning the fluid level and condition are to be verified at that mileage before the full change interval is reached.
- The full fluid change interval for the 2.0 CRDi 16V transfer case is 100,000 km under normal use conditions, placing the change interval at 2.5 times the inspection interval.
- The 0.8 liter capacity figure applies to a service fill context, as the specification is noted under the transfer box rather than a full drivetrain overhaul, indicating the volume expected during a routine drain-and-fill procedure.
- The normal use condition designation on the 2004-2009 2.0 CRDi 16V applies to both the 40,000 km check and the 100,000 km change interval, meaning neither interval is adjusted for severe operating conditions within the listed specification.