Ford F-250 (Super Duty) (USA)
Clutch fluid capacity & service interval
Ford F-250 (Super Duty) (USA) uses clutch fluid with a capacity range of 0.35 to 0.45 liters. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| F-250 5.4 V8 Super Duty (2008-2010) |
|
| F-250 5.4 V8 Super Duty 4x4 (2008-2010) |
|
| F-250 6.8 V10 Super Duty (2008-2010) |
|
| F-250 6.8 V10 Super Duty 4x4 (2008-2010) |
|
Additional Notes
- All four configurations listed for the 2008-2010 Ford F-250 Super Duty use a hydraulic clutch system, meaning clutch engagement is controlled through fluid pressure rather than a mechanical cable linkage.
- The specified fill level for each configuration is between the minimum and maximum marks on the reservoir, which is the standard service fill method for hydraulic clutch systems rather than a measured volume overhaul fill.
- Both the two-wheel-drive and four-wheel-drive variants of the 5.4 V8 share identical clutch fluid specifications across the 2008-2010 model years, with no differentiation in fill level guidance between the two drivetrain configurations.
- The same pattern applies to the 6.8 V10 configurations, where the two-wheel-drive and four-wheel-drive variants carry the same between-min-and-max specification for the 2008-2010 period.
- The specifications apply under normal use conditions for all four rows, meaning the fill level guidance is not adjusted for severe-duty or heavy-towing operating environments in the data provided.
- A between-min-and-max specification is typical for reservoir-based hydraulic systems, where the fluid level is maintained within a visible range rather than filled to a precise measured capacity, reflecting the self-contained nature of the hydraulic circuit.