Ford F-150, 12th Gen. (USA)
Power steering fluid capacity & service interval
Ford F-150, 12th Gen. (USA) utilizes power steering fluid with a capacity range between min and max. Service intervals include normal use. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| F-150 6.2 V8 (2012-2014) |
|
| F-150 6.2 V8 4x4 (2012-2014) |
|
| F-150 6.2 V8 SVT Raptor (2012-2013) |
|
| F-150 6.2 V8 (2010-2011) |
|
| F-150 6.2 V8 4x4 (2010-2011) |
|
| F-150 6.2 V8 SVT Raptor (2010-2011) |
|
Additional Notes
- All six configurations of the Ford F-150 12th Gen. (USA) covered in these specifications share the same power steering fluid fill guidance: the reservoir level should fall between the minimum and maximum marks on the reservoir.
- The "between min and max" specification reflects a service-level check rather than a measured volumetric capacity. Power steering reservoirs are typically checked visually against molded or printed level indicators rather than filled to a fixed fluid volume.
- All rows carry a normal use condition, meaning the fluid level guidance applies under standard operating circumstances rather than severe-duty or off-road cycles.
- The 6.2 V8 configurations split across two model year ranges, 2010-2011 and 2012-2014, across the standard rear-wheel-drive, 4x4, and SVT Raptor variants, indicating a mid-generation specification revision point at the 2012 model year.
- The SVT Raptor variant, which carries factory off-road suspension and wider track hardware, shares the same min-to-max power steering fluid specification as the standard and 4x4 trims for both the 2010-2011 and 2012-2013 ranges.
- The 4x4 configurations, which add front axle engagement hardware and associated steering geometry loads, are listed with the same power steering fluid level specification as the two-wheel-drive 6.2 V8 rows across both year ranges.