Ford E-450 (USA)

Manual transmission fluid capacity & service interval

Ford E-450 (USA) manual transmission fluid capacity is 5,5 liters. Service intervals include checks every 6 months and fluid changes at 100000 miles. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
E-450 6.0 Turbo Diesel (2008-2010)
  • Use: Normal
  • Capacity 5,5 liter
  • Change 100000 miles
  • Code: 6/1
E-450 6.0 Turbo Diesel (2004-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Change 100000 miles
  • Code: 6/1
E-450 4.6 V8 (2001-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Change 100000 miles
  • Code: 6/1
E-450 5.4 V8 (2001-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Change 100000 miles
  • Code: 6/1
E-450 6.8 V10 (2001-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Change 100000 miles
  • Code: 6/1
E-450 7.3 Turbo Diesel (2001-2003)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Code: 6/1

Additional Notes

  • All six configurations of the Ford E-450 (USA) share a uniform manual transmission fluid capacity of 5.5 liters, which is consistent with a service fill specification rather than a full overhaul or dry fill figure.
  • The 4.6 V8, 5.4 V8, and 6.8 V10 engines covering the 2001-2008 model years all carry a fluid check interval of every 6 months alongside a change interval of 100,000 miles under normal use conditions.
  • The 6.0 Turbo Diesel in both the 2004-2008 and 2008-2010 ranges specifies only a 100,000-mile change interval under normal use, with no periodic check interval listed for either entry.
  • A 100,000-mile change interval under normal use conditions reflects a long-life service schedule, typical of heavy-duty commercial van applications where extended drain intervals reduce downtime.
  • The 7.3 Turbo Diesel covering 2001-2003 specifies a 6-month fluid check interval under normal use but carries no listed change interval, distinguishing it from every other engine configuration in the lineup.
  • The 6-month check interval present across the gasoline V8, V10, and 7.3 Turbo Diesel entries reflects a monitoring schedule independent of mileage accumulation, which is relevant for vehicles that may sit for extended periods or operate in low-mileage commercial duty cycles.
  • The 6.0 Turbo Diesel appears across two overlapping year ranges, 2004-2008 and 2008-2010, with identical capacity and change interval specifications in both entries.

Other Systems