Ford E-250 (USA)

Manual transmission fluid capacity & service interval

Ford E-250 (USA) manual transmission fluid capacity is 5,5 liters. Service intervals include checking every 6 months and changing every 100000 miles. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
E-250 6.0 Turbo Diesel (2008-2010)
  • Use: Normal
  • Capacity 5,5 liter
  • Change 100000 miles
  • Code: 6/1
E-250 6.0 Turbo Diesel (2004-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Change 100000 miles
  • Code: 6/1
E-250 4.6 V8 (2001-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Change 100000 miles
  • Code: 6/1
E-250 5.4 V8 (2001-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Change 100000 miles
  • Code: 6/1
E-250 6.8 V10 (2001-2008)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Change 100000 miles
  • Code: 6/1
E-250 7.3 Turbo Diesel (2001-2003)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 6 months
  • Code: 6/1

Additional Notes

  • Across all listed engine configurations in the Ford E-250 (USA) manual transmission, the fluid capacity is uniformly 5.5 liters. A consistent capacity across such varied powertrains — from the 4.6 V8 to the 6.8 V10 and both diesel options — points to a shared transmission unit rather than engine-matched gearboxes.
  • The 4.6 V8, 5.4 V8, and 6.8 V10 variants covering 2001-2008 all share a 6-month fluid level check interval alongside a 100,000-mile change interval under normal use conditions. The check interval reflects a routine monitoring schedule separate from a full fluid replacement.
  • The 6.0 Turbo Diesel entries, spanning 2004-2010, list only a 100,000-mile change interval with no 6-month check interval specified. This distinguishes the diesel configurations from the gasoline engine entries in terms of listed service requirements.
  • The 7.3 Turbo Diesel (2001-2003) entry lists a 6-month check interval but carries no change interval in the specifications. This means no mileage-based fluid replacement figure is present for that engine configuration, unlike the other entries which include a 100,000-mile change point.
  • A 100,000-mile change interval, as listed for the gasoline and 6.0 Turbo Diesel variants, represents an extended-life service schedule. Such intervals are typically associated with factory-fill or long-life rated transmission fluids rather than conventional lubricants requiring more frequent replacement.
  • The 6.0 Turbo Diesel appears across two separate row entries: 2004-2008 and 2008-2010. Both entries carry identical specifications, with 5.5 liters capacity and a 100,000-mile change interval, indicating no change in manual transmission service requirements across that production span.

Other Systems