Dodge Ram Van (EU)
Power steering fluid capacity & service interval
Dodge Ram Van (EU) uses power steering fluid with a capacity ranging from 0.81 liter to 1.2 liter depending on the configuration. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Ram Van 3.3i V6 AWD (2003-2008) |
|
| Ram Van 2.5 TD (1990-1995) |
|
| Ram Van 3.0i (1990-1996) |
|
| Ram Van 2.5i (1989-1996) |
|
| Ram Van 3.3i (1989-1996) |
|
Additional Notes
- The Dodge Ram Van (EU) power steering system capacity holds at 0.81 liter across the 2.5 TD, 2.5i, 3.0i, and 3.3i variants produced between 1989-1996, regardless of whether the engine is diesel or petrol.
- The 0.81 liter figure represents the total fluid volume the power steering reservoir and circuit hold under normal operating conditions, not a partial top-up quantity.
- The Ram Van 3.3i V6 AWD (2003-2008) carries a noticeably larger power steering capacity of 1.2 liters, which is approximately 48% more than the 0.81 liter figure shared by the earlier variants.
- The increased 1.2 liter capacity in the 3.3i V6 AWD configuration is consistent with all-wheel-drive systems, which typically route hydraulic steering lines through additional components, expanding the total fluid volume the circuit requires.
- All five configurations list normal as the use condition, meaning the stated capacities apply to standard driving environments rather than severe-duty cycles such as frequent towing or extreme temperature operation.
- The 2.5 TD is the sole diesel variant among the listed configurations, covering the 1990-1995 model years, yet shares the same 0.81 liter power steering capacity as the petrol-powered 2.5i, 3.0i, and 3.3i models of the same era.
- The 3.3i engine appears in two distinct configurations within the specifications: the earlier 3.3i (1989-1996) with a 0.81 liter capacity and the later 3.3i V6 AWD (2003-2008) with a 1.2 liter capacity, making the drivetrain layout a key factor in determining the correct service fill volume.