BMC Levend

Differential fluid capacity & service interval

BMC Levend differential fluid capacity ranges from 3,2 to 3,4 liters. Service intervals include checks at 5000 km or 10000 km/6 months and fluid changes at 50000 km/12 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Levend L 3.0 (2006-2011)
  • Rear
  • Use: Normal
  • Capacity 3,4 liter
  • Check 10000 km/ 6 months
  • Change 50000 km/ 12 months
  • Code: BMC 140T
  • Levend L100 (2006-2011)
  • Rear
  • Use: Normal
  • Capacity 3,2 liter
  • Check 10000 km/ 6 months
  • Change 50000 km/ 12 months
  • Code: BMC 135T
  • Levend L60 (2006-2011)
  • Rear
  • Use: Normal
  • Capacity 3,2 liter
  • Check 5000 km
  • Change 50000 km/ 12 months
  • Code: BMC 135T

Additional Notes

  • The BMC Levend L 3.0 carries a rear differential fluid capacity of 3.4 liters, which is slightly higher than the 3.2-liter figure shared by the Levend L100 and Levend L60 variants across the 2006-2011 model range.
  • The 3.4-liter capacity of the Levend L 3.0 rear differential suggests a larger housing volume relative to the other two variants, which typically corresponds to a heavier-duty axle assembly designed for greater load or torque handling.
  • Both the Levend L100 and Levend L60 share an identical rear differential fluid capacity of 3.2 liters, indicating a common axle unit between those two configurations despite their different trim designations.
  • All three variants share the same fluid change interval of 50,000 km or 12 months under normal use conditions, whichever comes first, placing the time-based threshold at a relatively frequent annual cycle.
  • The Levend L 3.0 and Levend L100 both follow a fluid check schedule of every 10,000 km or 6 months under normal use, pairing a distance-based and time-based check interval together.
  • The Levend L60 has a fluid check interval of every 5,000 km under normal use, which is half the distance interval specified for the Levend L 3.0 and Levend L100, indicating a more frequent monitoring requirement for that variant.
  • The Levend L60 check interval is expressed solely as a distance figure of 5,000 km, without an accompanying time-based threshold, unlike the 10,000 km/6-month paired interval applied to the other two variants.

Other Systems