XCMG Wheeled loaders

Automatic transmission fluid capacity & service interval

XCMG wheeled loaders require automatic transmission fluid with a capacity of 45 liters. Service intervals include checking at 50 hours and changing at 250 or 500 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • LW420F (2010- )
  • Powershift
  • Use: Normal
  • Capacity 45 liter
  • Check 50 hours
  • Change 500 hours
  • LW420F (2010- )
  • Powershift
  • Use: First change only
  • Capacity 45 liter
  • Change 250 hours
  • ZL50G
  • Powershift
  • Use: Normal
  • Capacity 45 liter

Additional Notes

  • The XCMG Wheeled Loaders automatic transmission fluid capacity of 45 liters applies to the powershift transmission in both the LW420F and ZL50G configurations.
  • For the LW420F starting from 2010, the normal-use service interval calls for a fluid level check every 50 hours and a full fluid change every 500 hours.
  • A first-change-only interval of 250 hours is specified for the LW420F powershift transmission, which is half the standard 500-hour change interval applied under normal use conditions.
  • The first-change-only interval on the LW420F reflects a break-in service practice, where an earlier fluid change is performed once to remove contaminants generated during initial operation, after which the normal 500-hour interval applies.
  • The 45-liter capacity figure for the LW420F and ZL50G powershift transmissions represents a service fill volume, indicating the amount of fluid required during a standard fluid change or refill rather than a full overhaul rebuild quantity.

Other Systems