Volvo Wheeled milling machines, MW

Coolant capacity & service interval

Volvo wheeled milling machines, MW, require 15 liters of coolant. The service interval for coolant is 1000 hours or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MW500 GFT 36-L2 (2007-2014)
  • Use: Normal
  • Capacity 15 liter
  • Change 1000 hours/ 12 months
MW500 GFT 9T2 (2007-2014)
  • Use: Normal
  • Capacity 15 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • Both the MW500 GFT 36-L2 and MW500 GFT 9T2 share a cooling system capacity of 15 liters, which represents the total volume of coolant the system holds during a standard service fill.
  • The 1000-hour or 12-month change interval applies under normal use conditions for both MW500 configurations, meaning whichever threshold is reached first would govern the service timing.
  • The 15-liter capacity is consistent across the two MW500 drivetrain variants from 2007-2014, indicating no difference in cooling system volume between the GFT 36-L2 and GFT 9T2 configurations.