Venieri Backhoe loaders

Automatic transmission fluid capacity & service interval

Venieri Backhoe loaders require Automatic transmission fluid with a capacity of 1,7 liters. Maintenance intervals include checks at 200 hours and changes at 1000 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • VF 10.23, Perkins 1104C-44T
  • Hydrostatic
  • Use: Normal
  • Capacity 1,7 liter
  • Check 200 hours
  • Change 1000 hours
  • Code: Bosch Hydromatic 4/4

Additional Notes

  • The Venieri Backhoe loaders VF 10.23 with Perkins 1104C-44T engine carries a transmission and hydrostatic automatic transmission fluid capacity of 1.7 liters, a figure consistent with a service fill rather than a full overhaul volume.
  • The 200-hour interval applies to fluid level checks under normal use conditions, reflecting a routine inspection cycle rather than a full fluid exchange.
  • The change interval for the transmission and hydrostatic fluid is set at 1,000 hours under normal use conditions, a relatively extended drain period typical of hydrostatic systems operating within standard load and temperature parameters.

Other Systems