Thaler Telescopic loaders
Differential fluid capacity & service interval
Thaler telescopic loaders require differential fluid with a capacity range of 4 to 5,2 liters. Service intervals consist of 400 to 500 hours or 12 months. The data covers 10 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across all five Thaler telescopic loader models listed, the rear differential holds more fluid than the front differential, with the rear capacity exceeding the front in every case.
- The 2748/TA and 48T18 share identical differential capacities: 4 liters for the front and 4.7 liters for the rear. Both models also share the same change interval of 500 hours or 12 months under normal use conditions.
- The 3145/TA and 3150/TA carry the same front and rear differential capacities as the 2748/TA and 48T18, at 4 liters and 4.7 liters respectively, but the change interval for both is shorter at 400 hours or 12 months under normal use conditions.
- The 4061/TA carries the largest differential fluid volumes in the lineup, with 4.4 liters in the front and 5.2 liters in the rear. The rear differential capacity of 5.2 liters is the highest single differential volume across all models listed.
- The 4061/TA shares the 400-hour or 12-month change interval under normal use conditions with the 3145/TA and 3150/TA, despite holding a noticeably larger fluid volume in both differentials.
- All service intervals across the listed models are expressed as a dual condition: a maximum operating hour threshold and a fixed calendar period of 12 months, whichever comes first under normal use conditions.
- The 500-hour interval on the 2748/TA and 48T18 represents a 25 percent longer operating hour threshold before a fluid change is due compared to the 400-hour interval specified for the 3145/TA, 3150/TA, and 4061/TA.