Terex Wheeled loaders

Transfer case fluid capacity & service interval

Terex wheeled loaders require transfer case fluid with a capacity of 3,4 liters. Service intervals include checks at 50 and 500 hours, and changes at 100 and 1000 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TL160, 0199-> (2008- )
  • Use: Normal
  • Capacity 3,4 liter
  • Check 50 hours
  • Change 1000 hours/ 12 months
TL160, 0199-> (2008- )
  • Use: Initial service
  • Capacity 3,4 liter
  • Change 100 hours
TL160, 0101->0198 (2006-2008)
  • Use: Normal
  • Capacity 3,4 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
TL160, 0101->0198 (2006-2008)
  • Use: Initial service
  • Capacity 3,4 liter
  • Change 100 hours

Additional Notes

  • The Terex Wheeled Loaders TL160 transferbox holds 3.4 liters across all listed serial number ranges and use conditions, indicating a consistent service fill volume regardless of production period.
  • For the TL160 serial range 0101 to 0198, the normal-use check interval is set at 500 hours, meaning fluid level verification is scheduled at that point before the full change interval is reached.
  • The TL160 serial range 0199 and above carries a significantly shorter normal-use check interval of 50 hours, compared to the 500-hour check interval specified for the earlier 0101-to-0198 serial range.
  • Both serial ranges share the same normal-use change interval of 1,000 hours or 12 months, whichever comes first, applying a dual time-and-calendar threshold to the transferbox fluid replacement schedule.
  • An initial service change at 100 hours is specified for both serial ranges, representing an early drain intended to remove contaminants introduced during the break-in period before the standard 1,000-hour cycle begins.
  • The initial service interval carries no fluid check requirement, only a change at 100 hours, whereas the normal-use schedule for both serial ranges includes a dedicated check interval ahead of the change.

Other Systems