Skytrak Telehandlers

Automatic transmission fluid capacity & service interval

Skytrak Telehandlers utilize automatic transmission fluid with a capacity range of 0,95 to 16,3 liters. Service intervals consist of a 10 hour check and a 1000 hour change. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 6036, (S/N 9B0500 - 14833) (1997-2007)
  • Powershift
  • Use: Normal
  • Capacity 16,3 liter
  • Filter capacity 0,95 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: Clark 18000
  • 6036, (S/N 9B0500 - 14833) (1997-2007)
  • Powershift
  • Use: Normal
  • Capacity 16,3 liter
  • Filter capacity 0,95 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: Clark 18000
  • 6036T, (S/N 9B0500 - 14833) (1997-2007)
  • Powershift
  • Use: Normal
  • Capacity 16,3 liter
  • Filter capacity 0,95 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: Clark 18000
  • 6036T, (S/N 9B0500 - 14833) (1997-2007)
  • Powershift
  • Use: Normal
  • Capacity 16,3 liter
  • Filter capacity 0,95 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: Clark 18000
  • 6036, (S/N <- 9B0499) (1996-2007)
  • Powershift
  • Use: Normal
  • Capacity 16,3 liter
  • Filter capacity 0,95 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: Clark 18000
  • 6036, (S/N <- 9B0499) (1996-2007)
  • Powershift
  • Use: Normal
  • Capacity 16,3 liter
  • Filter capacity 0,95 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: Clark 18000

Additional Notes

  • The Skytrak Telehandlers covered in these specifications span the 6036 and 6036T models across serial number ranges that divide into two groups: units up to S/N 9B0499 and units from S/N 9B0500 through 14833.
  • All configurations listed carry a powershift transmission with a fluid capacity of 16.3 liters, a figure that reflects a full service fill for the transmission assembly rather than a partial drain-and-refill quantity.
  • A separate filter capacity of 0.95 liter is noted alongside the main 16.3-liter figure, meaning the filter housing itself holds nearly one additional liter that must be accounted for during a complete fluid service.
  • Under normal use conditions, a fluid level check interval of 10 hours applies across all listed 6036 and 6036T serial number ranges, reflecting the relatively frequent monitoring expected on heavy-duty telehandler powershift transmissions.
  • The fluid change interval under normal use is set at 1,000 hours for all configurations in the data, applying equally to both the earlier S/N 9B0499-and-below units from 1996-2007 and the later S/N 9B0500-14833 units from 1997-2007.
  • The 6036T shares identical automatic transmission fluid capacity and service interval specifications with the standard 6036 across the same S/N 9B0500-14833 range, indicating no differentiation in transmission fluid requirements between the two model designations.

Other Systems