Sennebogen Telescopic handlers
Coolant capacity & service interval
Sennebogen telescopic handlers require coolant with a capacity of 25-30 liters. Service intervals include checks every 10 hours and changes every 24 months or 3000 hours. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 355E, Stage IV/Tier 4f (2018- ) |
|
Additional Notes
- The Sennebogen 355E Stage IV/Tier 4f telescopic handler carries a coolant capacity range of 25 to 30 liters for the cooling system, which reflects a fill window rather than a fixed volume, accommodating variation in system state during servicing.
- The cooling system on the 355E Stage IV/Tier 4f calls for a coolant check interval of every 10 hours under normal use conditions, placing it among the more frequent fluid monitoring requirements typical of heavy material handling equipment.
- Coolant changes on the 355E Stage IV/Tier 4f are specified at 24 months or 3,000 hours under normal use conditions, with whichever threshold arrives first serving as the effective service trigger in time-based or hour-based operation.
- The dual-format change interval of 24 months and 3,000 hours reflects a design where calendar aging of coolant additives is treated as equally significant as operational wear, particularly relevant for machines with lower annual utilization that may reach the time limit before the hour limit.