Prinoth Panther
Coolant capacity & service interval
Prinoth Panther uses coolant with a capacity of 15 liters. Service intervals include checks every 10 hours and changes every 12 months. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| T12, Caterpillar C7.1 ACERT (T4f) |
|
Additional Notes
- The Prinoth Panther T12 with the Caterpillar C7.1 ACERT (T4f) engine holds 15 liters of coolant in the engine-only portion of the cooling system, a figure that reflects the engine circuit alone rather than the total system volume including any cab heating or auxiliary circuits.
- The 15-liter engine-only capacity designation is a service fill value, meaning it represents the volume used during routine maintenance rather than a full overhaul or system-flush figure that would account for residual fluid in all passages.
- Under normal use conditions, the coolant level on the Panther T12 is specified for inspection every 10 hours of operation, a notably short check interval that reflects the sensitivity of the Caterpillar C7.1 ACERT (T4f) engine to coolant loss in demanding cold-climate environments.
- The change interval for the cooling system under normal use conditions is set at 12 months, meaning the replacement schedule is time-based rather than hour-based, regardless of how many operating hours accumulate within that period.