Merlo Telescopic handlers, Rotating

Transfer case fluid capacity & service interval

Merlo Telescopic handlers, Rotating require 3 liters of transfer case fluid. Service intervals include checking every 500 hours and changing every 1500 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Roto 40.30 MCSS, Iveco NEF N67 NMT (Tier 3) (2011-2015)
  • Use: Normal
  • Capacity 3 liter
  • Check 500 hours
  • Change 1500 hours
Roto 60.24 MCSS, Iveco NEF N67 MNT (2011-2015)
  • Use: Normal
  • Capacity 3 liter
  • Change 1500 hours

Additional Notes

  • The Merlo Telescopic handlers, Rotating transfer case fluid capacity is 3 liters across both the Roto 40.30 MCSS and Roto 60.24 MCSS configurations for 2011-2015, indicating a service fill volume rather than a full overhaul quantity.
  • Both configurations share a 1500-hour change interval under normal use conditions, applied to the transferbox assembly.
  • The Roto 40.30 MCSS with the Iveco NEF N67 NMT (Tier 3) engine carries a 500-hour check interval alongside the 1500-hour change interval, a specification not present in the Roto 60.24 MCSS row.
  • A 500-hour check interval on the Roto 40.30 MCSS means the fluid level or condition is inspected at roughly one-third of the full drain cycle, without a fluid change being required at that point.

Other Systems