Merlo Telescopic handlers, Multifarmer

Differential fluid capacity & service interval

Merlo Telescopic handlers and Multifarmer models require 5,3 liters of differential fluid. The service interval for fluid changes is 1500 hours. The data covers 12 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 27.8, Deutz TCD 2012 L04 2V (2006-2009)
  • Front
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 27.8, Deutz TCD 2012 L04 2V (2006-2009)
  • Rear
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 29.6, Deutz TCD 2012 L04 2V (2006-2009)
  • Front
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 29.6, Deutz TCD 2012 L04 2V (2006-2009)
  • Rear
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.6 Classic2, Deutz TCD 2012 L04 2V (2005-2014)
  • Front
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.6 Classic2, Deutz TCD 2012 L04 2V (2005-2014)
  • Rear
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.9 Classic2, Deutz TCD 2012 L04 2V (2005-2014)
  • Front
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.9 Classic2, Deutz TCD 2012 L04 2V (2005-2014)
  • Rear
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.9 Top2, Deutz TCD 2012 L04 2V (2004-2014)
  • Front
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.9 Top2, Deutz TCD 2012 L04 2V (2004-2014)
  • Rear
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.6 Top2, Deutz TCD 2012 L04 2V (2002-2014)
  • Front
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours
  • 30.6 Top2, Deutz TCD 2012 L04 2V (2002-2014)
  • Rear
  • Use: Normal
  • Capacity 5,3 liter
  • Change 1500 hours

Additional Notes

  • Across all listed Merlo Telescopic handlers and Multifarmer configurations equipped with the Deutz TCD 2012 L04 2V engine, both the front and rear differentials share an identical fluid capacity of 5.3 liters. This equal capacity between axles indicates a symmetrical differential housing design used throughout the range.
  • The 5.3-liter figure represents a service fill capacity, meaning the volume required when draining and refilling the differential during a scheduled fluid change rather than a full overhaul or dry-build fill.
  • All listed configurations carry a differential fluid change interval of 1,500 hours under normal use conditions. In hour-based service schedules typical of agricultural and construction machinery, hours of operation replace calendar time as the primary maintenance trigger, reflecting the variable and often intensive duty cycles of telescopic handlers.
  • The normal use condition applied to all rows means the 1,500-hour interval is not a reduced or extended figure tied to severe or light-duty operation. A separate severe-use interval is not present in the specifications for any of these configurations.
  • The Merlo 30.6 Top2 with the Deutz TCD 2012 L04 2V covers the widest production span among the listed models, running from 2002-2014, while the 27.8 and 29.6 variants with the same engine are limited to 2006-2009.
  • The 30.6 Classic2 and 30.9 Classic2 both share the 2005-2014 production window, and both carry the same 5.3-liter front and rear differential capacity with the 1,500-hour change interval, showing no specification difference between the Classic2 trim levels despite the differing model designations.
  • The 30.9 Top2 entered production in 2004-2014, one year later than the Classic2 variants but two years earlier than the 27.8 and 29.6 models, placing the Top2 trims as the earlier-introduced configurations within the Deutz TCD 2012 L04 2V-powered lineup.
  • The consistent 5.3-liter capacity across all front and rear differentials in the listed range suggests a common axle assembly is used regardless of model designation or lift capacity rating, which simplifies fluid procurement and servicing across the Multifarmer lineup.

Other Systems