Manitou Masted range, MH

Coolant capacity & service interval

Manitou Masted range, MH models utilize coolant with a capacity range of 10 to 11 liters. Service intervals include checking at 8 and 50 hours, and changing at 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MH 20-4 Turbo Buggie Series 2-E3, Kubota V2403M-T-E3B (2008-2014)
  • Use: Normal
  • Capacity 10 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
MH 25-4 Turbo Buggie Series 2-E3, Kubota V2403M-T-E3B (2008-2014)
  • Use: Normal
  • Capacity 10 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
MH 20-4 Turbo Buggie Series 2-E2, Perkins 404C-22T (2004-2008)
  • Use: Normal
  • Capacity 10,5 liter
  • Check 8 hours
  • Change 2000 hours
MH 25-4 Turbo Buggie Series 2-E2, Perkins 404C-22T (2004-2008)
  • Use: Normal
  • Capacity 10,5 liter
  • Check 8 hours
  • Change 2000 hours
MH 20-4 Turbo Buggie, Perkins 903-27T (2002-2006)
  • Use: Normal
  • Capacity 11 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
MH 25-4 Turbo Buggie, Perkins 903-27T (2002-2006)
  • Use: Normal
  • Capacity 11 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Manitou MH masted range Buggie variants fitted with the Perkins 903-27T engine carry the largest cooling system capacity in the group at 11 liters, applying to both the MH 20-4 and MH 25-4 Turbo Buggie configurations produced from 2002-2006.
  • Configurations equipped with the Perkins 404C-22T engine, covering the MH 20-4 and MH 25-4 Turbo Buggie Series 2-E2 from 2004-2008, hold a cooling system capacity of 10.5 liters, placing them between the 903-27T and Kubota-engined variants.
  • The Kubota V2403M-T-E3B-powered versions of both the MH 20-4 and MH 25-4 Turbo Buggie Series 2-E3 from 2008-2014 share the smallest cooling system capacity at 10 liters.
  • All six configurations share a common coolant change interval of 2000 hours under normal use conditions, indicating a consistent long-term service cycle across engine families for the MH masted range.
  • The Perkins 404C-22T-equipped Series 2-E2 models specify a coolant check interval of every 8 hours, a notably shorter inspection frequency compared to the 50-hour check interval listed for the other four configurations.
  • The Kubota V2403M-T-E3B and Perkins 903-27T configurations add a calendar-based limit of 24 months alongside the 2000-hour change interval, meaning whichever threshold is reached first would govern the service event under normal use conditions.
  • The Perkins 404C-22T Series 2-E2 rows list only an hour-based change interval of 2000 hours with no accompanying calendar limit, unlike the time-plus-calendar dual threshold applied to the other engine variants.