Linde Forklift trucks, diesel (EVO series)
AdBlue (DEF) capacity & service interval
Linde Forklift trucks, diesel (EVO series) require AdBlue (DEF) with a capacity of 10 liters. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| H50D, Deutz TCD4.1 L04 (+ SCR) (2016- ) |
|
| H60D, Deutz TCD4.1 L04 (+ SCR) (2016- ) |
|
| H70D, Deutz TCD4.1 L04 (+ SCR) (2016- ) |
|
| H80/1100D, Deutz TCD4.1 L04 (+ SCR) (2016- ) |
|
| H80D, Deutz TCD4.1 L04 (+ SCR) (2016- ) |
|
Additional Notes
- The Linde EVO series diesel forklift trucks H50D, H60D, H70D, H80/1100D, and H80D all share a uniform AdBlue tank capacity of 10 liters when equipped with the Deutz TCD4.1 L04 engine and its selective catalytic reduction system.
- The selective catalytic reduction system requires AdBlue, a urea-water solution, to reduce nitrogen oxide emissions by converting them into nitrogen and water vapor through a chemical reaction in the exhaust stream.
- A 10-liter AdBlue tank is a relatively modest capacity for industrial equipment, which reflects the lower annual operating hours and duty cycles typical of forklift applications compared to on-highway diesel vehicles.
- All five model variants in the specification share the same Deutz TCD4.1 L04 engine configuration, meaning the identical 10-liter AdBlue capacity applies uniformly across the H50D through H80D load class range.
- The capacity figure of 10 liters represents a service fill value, indicating the usable volume of the AdBlue reservoir rather than a total system volume that would include residual fluid in lines or the dosing unit.
- All listed configurations carry a normal use condition designation, meaning the 10-liter capacity specification applies to standard operating environments rather than severe-duty or extended-interval service scenarios.