Linde Forklift trucks, diesel (358 series)

Coolant capacity & service interval

Linde Forklift trucks, diesel (358 series) require 25 liters of coolant. Service intervals include checking every 10 hours and changing every 2000 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
H120/1200, 358-01 / Perkins 1006.60T (1998- )
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 2000 hours
H140/1200, 358-01 / Perkins 1006.60T (1998- )
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 2000 hours
H160, 358-01 / Perkins 1006.60T (1998- )
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 2000 hours
H160/1200, 358-01 / Perkins 1006.60T (1998- )
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • All four configurations in the Linde 358 series covered here share an identical cooling system capacity of 25 liters, which reflects a full system service fill volume rather than a partial top-up quantity.
  • The Perkins 1006.60T is a six-cylinder turbocharged diesel engine, and a 25-liter coolant capacity is consistent with the larger cooling circuit demands of a turbocharged industrial powerplant operating under sustained load conditions.
  • The H120/1200, H140/1200, H160, and H160/1200 variants all share the same 10-hour coolant check interval, indicating a frequent visual or level inspection cycle suited to the demanding operating environment of heavy-lift diesel forklifts.
  • The 2000-hour coolant change interval applies uniformly across all four models under normal use conditions, meaning the full drain-and-refill service is tied to accumulated machine operating hours rather than a calendar-based schedule.
  • The H120/1200 and H140/1200 designations differ in rated lift capacity, yet both share identical cooling system specifications with the H160 and H160/1200, reflecting the common Perkins 1006.60T engine platform across the 358-01 series.
  • A 10-hour check interval in industrial forklift service typically corresponds to a daily or shift-start inspection routine, given that heavy-duty forklifts in continuous warehouse or logistics use commonly accumulate operating hours at that rate.

Other Systems