Linde Container handlers (313 series)

Automatic transmission fluid capacity & service interval

Linde Container handlers (313 series) require Automatic transmission fluid with a capacity of 15 liter. Service intervals include a 10 hour check and a 1000 hour change. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • C80/3, Perkins 1106C-E60TA
  • Powershift
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • C80/4, Perkins 1106C-E60TA
  • Powershift
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • C80/5, Perkins 1106C-E60TA
  • Powershift
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3

Additional Notes

  • The C80/3, C80/4, and C80/5 configurations of the Linde Container handlers (313 series) each share an identical powershift transmission fluid capacity of 15 liters, indicating a service fill volume rather than a full overhaul quantity.
  • A fluid level check interval of 10 operating hours applies to all three configurations under normal use conditions, reflecting the relatively frequent monitoring demands of powershift transmission systems in heavy container handling applications.
  • The fluid change interval is set at 1000 operating hours across the C80/3, C80/4, and C80/5 variants, a figure tied specifically to normal use conditions for the powershift transmission.
  • All three variants are equipped with the Perkins 1106C-E60TA engine, and the uniform 15-liter capacity across the C80/3, C80/4, and C80/5 suggests the powershift transmission unit itself remains consistent regardless of the numeric variant designation.

Other Systems