Kubota Skid steer loaders, SSV

Coolant capacity & service interval

Kubota skid steer loaders, SSV utilize coolant with a capacity range of 2 to 7,6 liters. Service intervals require a change every 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
SSV65, Kubota V2607-CR-TE4 (2015- )
  • Use: Normal
  • Capacity 6,8 liter (Radiator)
  • Capacity 2 liter (Recovery tank)
  • Change 24 months
SSV75, Kubota V3307-CR-TE4 (2015- )
  • Use: Normal
  • Capacity 7,6 liter (Radiator)
  • Capacity 2 liter (Recovery tank)
  • Change 24 months

Additional Notes

  • The SSV65 carries a radiator capacity of 6.8 liters, while the SSV75 holds 7.6 liters, reflecting the larger displacement of the V3307-CR-TE4 engine relative to the V2607-CR-TE4.
  • Both the SSV65 and SSV75 share an identical recovery tank capacity of 2 liters, meaning the overflow reservoir specification is consistent across the two models regardless of engine size.
  • A 24-month coolant change interval applies to both configurations under normal use conditions, meaning the replacement schedule is time-based rather than tied to operating hours or mileage.
  • The radiator capacity figures represent the total system fill volume for the cooling circuit, which is the amount of coolant required when the system is drained and refilled during a scheduled service.
  • The recovery tank on each model holds 2 liters separately from the radiator volume, so a full cooling system service on the SSV65 accounts for up to 8.8 liters total across both components, and up to 9.6 liters on the SSV75.