Komatsu Forklift trucks, LPG/petrol - Tusk DX20 series, -8

Coolant capacity & service interval

Komatsu Forklift trucks, LPG/petrol - Tusk DX20 series, -8 use coolant with a capacity of 17 liters. Service intervals include checks every 8 hours and changes every 6 months or 1200 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
1540PG-8, Nissan TB45E (44801 ->)
  • Use: Normal
  • Capacity 17 liter
  • Check 8 hours
  • Change 6 months/ 1200 hours

Additional Notes

  • The cooling system capacity for the 1540PG-8 with Nissan TB45E engine (serial number 44801 onward) is 17 liters, which represents a full system fill volume covering the engine block, radiator, and associated passages.
  • A check interval of every 8 hours places coolant level inspection on the same frequency as a typical daily pre-shift inspection cycle, reflecting how frequently fluid levels are monitored in operational forklift environments.
  • The change interval is specified at 6 months or 1,200 hours, whichever comes first, and applies under normal use conditions, meaning standard duty cycles without the accelerated degradation associated with severe operating environments.

Other Systems